Mario Cowley asked:


One way, if not the best way to get your carpets truly clean would be through Truckmounted steam cleaning. After you’ve chosen to get your carpets cleaned by this method, now you only have to find somebody that can do it correctly! Truck mounted carpet steam cleaning is the only recommended method for cleaning your carpets, so that you don’t void your carpet warranty.

So, what does truckmounted mean? In the world of carpet cleaners, to be “truck mounted” simply means that a cleaning machine used to clean carpets is mounted on or in a vehicle, usually inside of a van. This machine is usually a standalone unit. It is very powerful and does not require anything more than just a water connection from a prospective clients residence or business. These machines were made to provide a simultaneous combination of hot water / steam injection and powerful vacuum extraction, in order to get your carpets clean and dry.

If your carpet cleaner’s truckmounted equipment requires an electrical connection in order to operate, their “machine” is not a truckmount. There are other types of carpet cleaning units called “portable machines”, but they are nowhere near as powerful as their gasoline powered counterparts. Besides, they use up way too much of your electricity, making for a big bill! But then again, you need a good extreme portable unit to get that 18th story high rise condo unit cleaned!

Gas powered units provide powerful vacuum suction for water extraction and use a “heat exchanger” to heat the water, bringing it’s temperature up to 210 degrees Fahrenheit. Some truckmount owners also have additional equipment in order to get the water even hotter than that!

All in all, truck mount carpet cleaning is the best way to get your carpets cleaned, thoroughly flushed and rinsed and depending on how much power your carpet cleaner’s machine has, it will even leave your carpet relatively dry without the aid of any additional equipment. But still, quality carpet cleaning is a step-by-step process.

For more information about the best Truck Mounted San Diego Carpet Cleaning has to offer, visit my website.



TEDDY

samsoncnc asked:

Master fabricator Rex Bailey used the Samson™ CNC machine to build the “Yeti” (the abominable snowman), a monster truck that drives through snow more than 3 feet deep. The 76-inch tractor tires, Unimog portal axles, and modified Dodge 3500 Cummins diesel truck are all joined together by custom-designed plates that Rex made with the machine. http://www.samsoncnc.com

FRANKLYN

Joe Trzepla asked:


Safety is always a priority for drivers. This is especially true for those transporting hazardous materials. Strict adherence to federal and state hazmat regulations is imperative. Failure to comply with these regulations can result in stiff fines and penalties, including being barred from working with commercial transports.

The Federal Motor Carrier Safety Administration requires that all trucks transporting hazardous materials have this fact clearly marked for other drivers. Drivers must always be in compliance with state and local traffic regulations.

When an accident takes place involving hazardous materials, it is important to notify all of the proper authorities. While it is important to notify your truck insurance provider as soon as possible, they are usually one of the last agencies that should be contacted. After emergency services have been contacted, but no later than 12 hours following the accident, the first agency you should contact is the Department of Transportation (DOT) National Response Center (NRC), followed by the Center for Disease Control and Prevention (CDC) if the incident involves etiologic agents.

These agencies should be immediately contacted in the following instances:

-A person is killed.

-A person receives an injury requiring hospitalization.

-There in an evacuation of the general public for one hour or more.

-A major transportation route is blocked or inaccessible for more than one hour.

-Fire, breakage, spillage, or possibly contamination occurs with a radioactive cargo.

-The spill of a marine pollutant occurs in a quantity greater than 450 L (119 gallons) of liquid material or 400 kg (882 lbs.) of solid material.

-The driver deems that there is a threat to life not covered in the previous criteria.

The first report will be made by telephone. The NRC reporting number is (800) 424-8802, and the CDC reporting number is (800) 232-0124. It is important to have these numbers available at all times. Be sure to have all information prepared before calling. The information needed in this report will be:

1. Name of Reporter.

2. Name and address of person represented by reporter.

3. Phone number where reporter can be contacted.

4. Date, time, and location of incident.

5. The extent of injury, if any.

6. Class or division, proper shipping name, and quantity of hazardous materials involved if that information is immediately available.

7. The nature of the incident and whether a threat to life still exists at the scene.

The second report that needs to be filed will be DOT Form F 5800.1. It must be submitted within 30 days. In addition to the above circumstances, this form must be submitted after the following events:

-The unintentional release or discharge of hazardous materials or waste.

-A specification cargo tank with a capacity of 1,000 gallons or greater containing any hazardous material suffers structural damage to the lading retention system or damage that requires repair to a system intended to protect the lading retention system, even if there is no release of hazardous material.

-Undeclared hazardous materials are discovered.



ROBT

krysdizzle_2006 asked:


You are a traffic accident investigator. You have arrived at the scene of an accident. Two trucks of equal mass(3,000 kg each) were involved in a rear-end accident at a stop sign. here is what you know:
Truck 1 approched the intersection from the top of a 22-meter hill.
Truck 2 was on a flat stretch of road directly in front of truck 1.
At the bottom of the hill, before braking for the stop sign, Truck 1 was going 20 m/s and truck 2 was going 35 m/s.
From the skid marks on the road you can see that truck 1 applied force on its brakes for 2 seconds, 80 meters before the stop sign.
There were no skid marks left by truck 2. The collision occured at the stop sign, where truck 2 had stopped.
After the collision, both trucks were moving together in the same direction at 10 m/s, before slowly rolling to a stop.
You must now push truck 2 using 1,000 N of force, 8 meters off the side of the road so no one else gets hurt.

GAIL

kh2anime asked:


a large truck on a hydraulic lift exerts 7.000 N of force on a pisten with an area of 0.4 m3.the pistens can only support is 16.000 pa of pressure is it safe yo place this truck on hydraulic lift

COLTON

Beth Fork asked:


The Regular Pallet Truck

As in its name this is the standard type of pallet truck that is available. The idea of a regular pallet truck is to easily move heavy loads around as you wish, you slide the 2 front forks into the pallet or underneath the load you are lifting, use the jack to ‘jack’ it up off the floor, and then use the handle to steer the load where you need it to be. Once in position you can lower the load to the floor.

 

Low Profile Pallet Trucks

This is essentially the same as a regular pallet truck except it is more specialized to lifting ultra-low crates or pallets or equipment off the floor such as vending machines, gaming machines, filing cabinets and other furniture.

Rough Terrain Pallet Trucks

This pallet truck is designed to cope with very rough and uneven ground. Where the ordinary pallet truck would have difficulty with the ground and travelling on the flooring, the rough terrain pallet truck would handle this a lot more easily. This machine would be more suitable on building sites for example.

Reel Carrying Pallet Trucks

These are specially designed for carrying horizontal cylindrical loads such as paper reels, rolled carpets, cable drums and so on. It works in the same way as the regular pallet truck except you can easily slide the fork into the cylindrical load and carry it to wherever necessary.

Weighing Scales Pallet Trucks

As in the name this pallet truck features weighing scales. Powered by batteries any load that is lifted with the pallet truck will calculate weight which is sometimes necessary.

Galvanised & Stainless Pallet Trucks

These are pallet trucks made from stainless steel. These pallet trucks are a lot more suited to the food industry or any industry where corrosive acids and saline solutions are used regularly. The galvanised and stainless steel protects the pallet truck from these substances and so the turck stays in better form.

 



JEROMY

Muna wa Wanjiru asked:


As many of us are aware the seasons have a way of passing us by very quickly. Sometimes before we are aware, it is winter and we are in the middle of a snow storm. Once the snow stops you will see different types of snow plows chugging through the streets removing snow. One of the more common sights in a city is that of a plow truck.

The plow truck is just the same as every other truck except that you will find a snow plow attached to the plow truck. Since there are many different types of snow plows you should make sure that you are buying a snow plow that will fit on your plow truck easily. To see what are the different plow truck products that you can install you should look around first.

The many snow plow and plow truck centers and dealers should be able to advise you on the best type of snow plow accessories and parts to buy. With this information you can look at these various parts. This will allow you to choose the snow plow accessories that will work with your plow truck. As you start choosing your plow truck parts you will need to remember the reason for these parts. Otherwise you may end up buying parts for another season other than winter.

You may want to look for plow trucks and their various parts on the internet. Here with the many different sites you will be able to look for the plow truck that is within your budget. This way you can also buy the other accessories that go with the plow truck. Now since you will find many different snow plows you will need to see if the snow plows have the ability to cut through ice and travel over rough terrain. This is a necessity due to the fact that you sometimes have no control over the surface that you are traveling on.

The other item that you must look into is that the snow plow blade that you will be attaching to the plow truck should be able to fit the truck properly and securely. In addition it must be able to move large amounts of snow out of your way. Therefore the snow plow itself should be wide and deeply curved so that the snow will not stay in a low clump while you are moving it.

As you are depending on your plow truck to keep the roads and paths around you free from the snow you will need to get the best. To this end you should choose your plow truck from one of the better known plow truck dealers and you can be assured that you are going to be able to see that snow vanishing.



RENALDO